Lab Aquarium RO DI

Why You Should Use Reverse Osmosis Water for Your Aquarium
Home ·Our Services ·RO/DI System for Lab & Aquarium

Lab Aquarium RO DI

A reverse osmosis water system works to filter the water, removing any contaminants so that you end up with clean water.The RO/DI systems have a great reputation as being an effective way to filter the water; new advances in technology have improved the filtration capability to the point of removing up to 99 percent of the impurities.

Reverse osmosis water is an incredible starting point for any aquarium owner seeking to create ideal water conditions for their fish and coral. RO water is completely free from chemicals toxic to fish like chlorine and chloramines, is neutral in pH, and contains no water hardness. Many tropical fish require specific water environments to thrive. Reverse osmosis allows you to control the parameters of the water chemistry, meaning you can support whatever aquatic life you desire. Saltwater and reef aquariums are notoriously difficult to maintain. Reverse osmosis simplifies the process by giving you a reliable, consistent pure water to craft your saltwater environment.

How does reverse osmosis work?

  • Reverse osmosis purifies water when pressure forces it through a semipermeable membrane covered in minuscule pores.
  • The membrane allows water molecules to pass through its tiny lattice of tiny pores, but contaminants are rejected.
  • All salts, nitrates, phosphates, and minerals are unable to pass through the membrane and are drained out of the system.
  • This waste, called the brine, flows from the reverse osmosis system to a drainage site.

Why should I use reverse osmosis for my salt-water aquariums?

Reverse osmosis gives you a starting point to create the perfect marine environment for your saltwater fish.

Once you’ve obtained the contaminant and mineral-free water produced by reverse osmosis, you are now able to regulate the water profile to best match your fish’s needs. Three of the most important parameters of aquarium water chemistry are general hardness (GH), carbonate hardness (KH), and the pH balance of the water. In general, most fish will favour either a softer, acidic environment or harder and more alkaline waters.

The Filtration Process and Stages

  • Depending on the type of RO/DI water system, it can have 4 to 6 filtration stages. It is during these stages that the water is purified to remove any contaminants and make sure it is clean for your aquarium fish.
  • These systems often have additional filters that remove the odor and improve the taste, but one that ensures all the dirt is removed should be sufficient for use in an aquarium.

RO/DI SYSTEM FEATURES: UltraTec RO Systems have designed all of our RO/DI units with Australian reef aquariums in mind. However, the water that they produce is perfect for all other types of salt water and freshwater aquariums.

Easy to use and store

Full-sized DI resin stage for 0ppm TDS water

Colour coded ¼” tubing for simple identification

Common faucet adaptor included for hassle-free installation

Pre-installed NSF certified filters

Dual carbon stages for superior chlorine & chloramine removal

Housing Wrench

Drain Clamp (For Wastewater Line)

1/2″ BSP to 1/4 RO Tube Undersink Connector (measures approx. 19mm)

2 Meters RO Tube in Yellow (Production Water), Red (Waste Water) & White (Source Water)

All Prefilters, RO Membrane & DI Resin

You have to consider how easy or hard it would be to use the reverse osmosis system that you choose. There is no need to buy a model that will take a lot of time to just configure or operating it.

The idea is to end up with the best reverse osmosis system that comes with easy-to-use controls. It is from these controls that you can operate the system and create clean water for your aquarium.

Ultra Tec Water Treatment LLC

Please feel free to contact us. We will get back to you with 1-2 business days. Or just call us now

Get A Free Quote

Download Related Material

Related Products

aquarium ro di 5 stages 0ppm 75 gpd system

DI is Demineralization by Ionization. A DI filter removes the few mineral ions that make it through the RO membrane; this makes sure that the water is as...

lab zero ppm water filter system

Produces zero PPM Water constantly Fully Automatic Water Distillers / De Ionizer / De Mineralizer Machine with micro computorized control system inline TDS Monitoring System....

demineralizer – deionizer for aquarium & labs

Model no: UT-215-6 Type: De-ionization(DI) Post Water Filter Diameter: 53 MM Length: ....

UltraTec 75 GPD RO System

System provides your family with premium water for drinking and cooking at a fraction of the cost of bottled water. That means no more deliveries...

We can be your great business partner and help you growth strongly.